Hey Mike. Installation and fitment of the BedSlide Sliding Truck Bed Tray # BE36WR is based on the factory truck bed. Fitment can depend on the exact type of liner, but generally the liner will need to be removed in order to install a BedSlide Tray. view full answer...
To find if the BedSlide Sliding Truck Bed Tray w/ T-Tracks # BE39ER will fit you will need to measure. The tray is 48" wide so you will need at least that much space for it to fit. I would say 48-1/2" would be good just to give a little clearance on either side. view full answer...
Yes, the Lomax Hard Tonneau Cover # AB1010029 is compatible with the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-501. Both of these are designed to fit your 2019 Ford F-150 with a 6-1/2' bed. The Lomax cover installs inside the bed rails and the Thule TracRac installs on top of the bed rails so they won't interfere with each other.
The one thing you may run into is the uprights getting in the way of the panels when you fold the cover because they're angled in slightly.... view full answer...
Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack System # TX96NV in black if the color is more important to you than the rack itself. This rack allows you to also slide the rails but not as easily as on the Thule. view full answer...
Yes, the Brophy Slide In Camper Tie-Downs # HSAB will fit a dually. They simply require your truck to have at least 2" between its sidewall and lip of the bed rail, and you can't have a drop-in bed liner, aftermarket bed rails, double-walled bed, or side-step bed. view full answer...
Hey Justin! There's only one ladder rack with a cantilever that fits your short bed 2015 GMC Sierra 1500 and is compatible with the BAK Revolver X2 Hard Tonneau Cover item # BAK39120. It is the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever item # TH43002XT-782EX.
The Thule item # TH43002XT-782EX has a sliding base that attaches to the stake-pockets on top of your Sierra's bed. This is what makes it compatible with your X2 cover. This ladder rack has a 1,250 lbs
capacity... view full answer...
Your 2015 Toyota Tundra with the 6-1/2' bed will require the Base Rails # TH21610 to attach the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT. view full answer...
Yes, the Curt A25 5th Wheel Trailer Hitch # C16180 will fit on your 2020 Chevrolet Silverado 3500 but it typically not recommended unless you have a pivoting pin box like the Reese Sidewinder # RP34FR since you have a short bed. First you will need Rail Kit # C16429-204 if your truck did not come with the factory in bed hitch prep or you will need the Adapter # C88KR if your truck does have the in bed mounting system.
Typically a short bed truck is recommended to have a sliding 5th wheel... view full answer...
The # HSWB is designed to fit Ford trucks. For your 2024 Ram 2500 you either need the # HSAB, # HSBP or # HSSF. All of these will fit the 6-1/2' bed and 8' bed with crew cab. The # HSAB is the only one compatible with the RamBox. view full answer...
For your 2006 GMC Sierra 1500 with a 6-1/2 foot bed we do have a snap on style tonneau cover that fits with the Truxedo TruXport # TX281101. This is the only snap on style cover we have fits your truck. view full answer...
Hi Dennis,
The Access TonnoSport Soft, Roll-Up Tonneau Cover # A22010409 is a confirmed fit for your 2024 Ford F-250 (8' bed) and would sit inside the bedrails allowing you to use a stake pocket-mounted ladder rack, like the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-000. The rails of the rack may make it a bit harder to get your fingers in to fully press in the cover to the Velcro on the cover rails but you'll still be able to secure it. view full answer...
The Pullrite Superglide 2700 is not compatible with the 2022 Ram 2500 short bed with Ram boxes. When you have the Ram boxes installed the only choice is to use a fixed 5th wheel hitch and a rotating pin box like the Reese Sidewinder # RP34FR. You would need to identify your current pin box to find the right replacement.
If you end up getting the truck I would sell the sliding hitch to recoup some of the money. Then you can pick up a fixed 5th wheel hitch like the # C16120 which can be... view full answer...
Hi there Jay, thanks for the question and we do have a really good option to outfit your 2024 Toyota Tundra short bed with a hard roll-up tonneau and rack. I looked into the CT and Elevate but the info is they aren't compatible, so what you will need to go with is a different inside-the-rails tonneau cover, from BAK:
- BAK Revolver X4s Hard Tonneau Cover # BAK87AV
This is a hard roll-up cover and frankly, one of the best covers you can get - of any style. It sits about flush with your... view full answer...
Hi Tony; that's a good question and unequivocally the better option is the Curt A20 5th Wheel Trailer Hitch w/ S20 Slider # C55DR.
This will not only give you extra height, but won't void the warranty on your trailer frame like the Convert-A-Ball adapter does, gives you better turning clearance, and is just a more secure overall set up than what is essentially two different adapters.
The # C55DR is also just a really good hitch overall with a superb interlocking jaw system for a tight... view full answer...
Hey Jim, Curt states that the Crosswing part # C32DR can't be used with anything other than a spray in bed liner. But if your mat is really 1/8 of an inch thick and you don't have a spray in bed liner I would think it should still fit pretty easily.
What prevents the hitch from turning on the gooseneck ball is the set screws that hold the ball tightly and prevent it from being able to spin. view full answer...
For your 2022 Ram 1500 I recommend the TruXedo Elevate Truck Bed Rack System # TX96NV, which is known to be compatible with the following BAK tonneau cover models: FiberMax, F1, G2, HD, MX4, Revolver X2, Revolver X4, and VP. It has a 500lb capacity, adjusts from 18" to 28" tall, and mounts into a t-slot so that you can easily slide the towers around to fit various needs, like mounting your Yakima Skyrise HD # Y07437 view full answer...
Hey Trevor, so the B and W Companion Slider hitch part # BWRVK3400 only fits the B and W Turnoverball gooseneck hitches and would not fit the gooseneck hitch of your 2022 Chevy Silverado 2500 with OEM pucks.
The funny thing about the Patriot slider is that it's only hitch that can't be used with any OEM bed rail adapters either so we're back to the Companion hitch that fits the pucks directly part # BWRVK3775 as your best option. view full answer...
The Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 does not have a difference in bed styles since it will work with both the 6 1/2' and 8' bed models of the 2023 Ram 2500. view full answer...
Hey Steve, so Rightline does have a truck bed tent that fits your 2019 Chevy Colorado 5 foot bed with the part # RL110766 but the tent you mentioned does not fit. view full answer...
The weight is 20 lbs for the BedRug XLT Truck Bed Mat # XLTBMT19SBS that fits your 2024 Ram 1500 with a 6-1/2 foot bed.
The 3/4 inch thick mat is indeed the thickest you can get for your truck, so it's going to offer the most materia and best cushioning and resistance for your truck bed. view full answer...